Steel & Ceramic Fabrication Capabilities

Fabrication

We offer design/fabrication capabilities to the customer’s specs.

Applications: Elbows, tees, cyclones, cones, transitions, ductwork, chutes, reducers, laterals, wyes, hoppers

Materials: Carbon steel, stainless steel, wear plate

Technical: Certified welders

Elbows

Engineering, steel fabrication and ceramic lining for the manufacture of elbows. Ceramic lined elbows will typically outlast cast and carbon steel elbows by factors of 3 to 15 times.

All ceramic materials used in the manufacture of ceramic lined elbows meet or exceed the following specs:

• Alumina (Al2 O3) content of at least 85%
• Bricks shall be staggered so seam will not line up to another parallel to the direction of the flow
• Standard ceramic lining throughout the elbow shall be of one inch thickness and pre-engineered
• All elbows except burner elbows are to be fabricated in segments with a maximum angle of 18º
• Burner elbows shall be fabricated using three piece miters, typically two 22.5º and one 45º

Classifier Cones

Steel fabrication and ceramic lining for classifier cones. Engineered to meet your specific wear patterns and manufactured to OEM specs. Ceramic can be installed on inside diameter (ID), or outside diameter (OD), or both.

• Alumina (Al2 O3) content of at least 85%
• Bricks shall be staggered so seam will not line up to another parallel to the direction of the flow